added RSpec

.rspec

@@ -0,0 +1,3 @@
+--color
+--warnings
+--require spec_helper

Gemfile

@@ -36,6 +36,7 @@ group :production do
   gem 'unicorn', group: :production
 end
 
-group :test do
+group :development, :test do
+  gem 'rspec-rails', '~> 3.0.0'
   gem 'simplecov'
 end

Gemfile.lock

@@ -50,6 +50,7 @@ GEM
       responders
       thread_safe (~> 0.1)
       warden (~> 1.2.3)
+    diff-lcs (1.2.5)
     docile (1.1.5)
     erubis (2.7.0)
     eventmachine (1.0.3)
@@ -107,6 +108,22 @@ GEM
       json (~> 1.4)
     responders (1.1.1)
       railties (>= 3.2, < 4.2)
+    rspec-core (3.0.4)
+      rspec-support (~> 3.0.0)
+    rspec-expectations (3.0.4)
+      diff-lcs (>= 1.2.0, < 2.0)
+      rspec-support (~> 3.0.0)
+    rspec-mocks (3.0.4)
+      rspec-support (~> 3.0.0)
+    rspec-rails (3.0.2)
+      actionpack (>= 3.0)
+      activesupport (>= 3.0)
+      railties (>= 3.0)
+      rspec-core (~> 3.0.0)
+      rspec-expectations (~> 3.0.0)
+      rspec-mocks (~> 3.0.0)
+      rspec-support (~> 3.0.0)
+    rspec-support (3.0.4)
     sass (3.2.19)
     sass-rails (4.0.4)
       railties (>= 4.0.0, < 5.0)
@@ -174,6 +191,7 @@ DEPENDENCIES
   nprogress-rails
   pg
   rails (= 4.1.7)
+  rspec-rails (~> 3.0.0)
   sass-rails (~> 4.0.3)
   sdoc (~> 0.4.1)
   simplecov

spec/rails_helper.rb

@@ -0,0 +1,43 @@
+# This file is copied to spec/ when you run 'rails generate rspec:install'
+ENV["RAILS_ENV"] ||= 'test'
+require 'spec_helper'
+require File.expand_path("../../config/environment", __FILE__)
+require 'rspec/rails'
+
+# Requires supporting ruby files with custom matchers and macros, etc, in
+# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
+# run as spec files by default. This means that files in spec/support that end
+# in _spec.rb will both be required and run as specs, causing the specs to be
+# run twice. It is recommended that you do not name files matching this glob to
+# end with _spec.rb. You can configure this pattern with the --pattern
+# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
+Dir[Rails.root.join("spec/support/**/*.rb")].each { |f| require f }
+
+# Checks for pending migrations before tests are run.
+# If you are not using ActiveRecord, you can remove this line.
+ActiveRecord::Migration.maintain_test_schema!
+
+RSpec.configure do |config|
+  # Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
+  config.fixture_path = "#{::Rails.root}/spec/fixtures"
+
+  # If you're not using ActiveRecord, or you'd prefer not to run each of your
+  # examples within a transaction, remove the following line or assign false
+  # instead of true.
+  config.use_transactional_fixtures = true
+
+  # RSpec Rails can automatically mix in different behaviours to your tests
+  # based on their file location, for example enabling you to call `get` and
+  # `post` in specs under `spec/controllers`.
+  #
+  # You can disable this behaviour by removing the line below, and instead
+  # explicitly tag your specs with their type, e.g.:
+  #
+  #     RSpec.describe UsersController, :type => :controller do
+  #       # ...
+  #     end
+  #
+  # The different available types are documented in the features, such as in
+  # https://relishapp.com/rspec/rspec-rails/docs
+  config.infer_spec_type_from_file_location!
+end

spec/spec_helper.rb

@@ -0,0 +1,81 @@
+require 'simplecov'
+SimpleCov.start
+
+# This file was generated by the `rails generate rspec:install` command. Conventionally, all
+# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
+# The generated `.rspec` file contains `--require spec_helper` which will cause this
+# file to always be loaded, without a need to explicitly require it in any files.
+#
+# Given that it is always loaded, you are encouraged to keep this file as
+# light-weight as possible. Requiring heavyweight dependencies from this file
+# will add to the boot time of your test suite on EVERY test run, even for an
+# individual file that may not need all of that loaded. Instead, make a
+# separate helper file that requires this one and then use it only in the specs
+# that actually need it.
+#
+# The `.rspec` file also contains a few flags that are not defaults but that
+# users commonly want.
+#
+# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
+RSpec.configure do |config|
+# The settings below are suggested to provide a good initial experience
+# with RSpec, but feel free to customize to your heart's content.
+=begin
+  # These two settings work together to allow you to limit a spec run
+  # to individual examples or groups you care about by tagging them with
+  # `:focus` metadata. When nothing is tagged with `:focus`, all examples
+  # get run.
+  config.filter_run :focus
+  config.run_all_when_everything_filtered = true
+
+  # Many RSpec users commonly either run the entire suite or an individual
+  # file, and it's useful to allow more verbose output when running an
+  # individual spec file.
+  if config.files_to_run.one?
+    # Use the documentation formatter for detailed output,
+    # unless a formatter has already been configured
+    # (e.g. via a command-line flag).
+    config.default_formatter = 'doc'
+  end
+
+  # Print the 10 slowest examples and example groups at the
+  # end of the spec run, to help surface which specs are running
+  # particularly slow.
+  config.profile_examples = 10
+
+  # Run specs in random order to surface order dependencies. If you find an
+  # order dependency and want to debug it, you can fix the order by providing
+  # the seed, which is printed after each run.
+  #     --seed 1234
+  config.order = :random
+
+  # Seed global randomization in this process using the `--seed` CLI option.
+  # Setting this allows you to use `--seed` to deterministically reproduce
+  # test failures related to randomization by passing the same `--seed` value
+  # as the one that triggered the failure.
+  Kernel.srand config.seed
+
+  # rspec-expectations config goes here. You can use an alternate
+  # assertion/expectation library such as wrong or the stdlib/minitest
+  # assertions if you prefer.
+  config.expect_with :rspec do |expectations|
+    # Enable only the newer, non-monkey-patching expect syntax.
+    # For more details, see:
+    #   - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
+    expectations.syntax = :expect
+  end
+
+  # rspec-mocks config goes here. You can use an alternate test double
+  # library (such as bogus or mocha) by changing the `mock_with` option here.
+  config.mock_with :rspec do |mocks|
+    # Enable only the newer, non-monkey-patching expect syntax.
+    # For more details, see:
+    #   - http://teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
+    mocks.syntax = :expect
+
+    # Prevents you from mocking or stubbing a method that does not exist on
+    # a real object. This is generally recommended.
+    mocks.verify_partial_doubles = true
+  end
+=end
+end