added RSpec

This commit is contained in:
nilsding 2014-11-13 18:12:51 +01:00
parent 95bb85a4f6
commit d6382eba15
5 changed files with 147 additions and 1 deletions

3
.rspec Normal file
View File

@ -0,0 +1,3 @@
--color
--warnings
--require spec_helper

View File

@ -36,6 +36,7 @@ group :production do
gem 'unicorn', group: :production gem 'unicorn', group: :production
end end
group :test do group :development, :test do
gem 'rspec-rails', '~> 3.0.0'
gem 'simplecov' gem 'simplecov'
end end

View File

@ -50,6 +50,7 @@ GEM
responders responders
thread_safe (~> 0.1) thread_safe (~> 0.1)
warden (~> 1.2.3) warden (~> 1.2.3)
diff-lcs (1.2.5)
docile (1.1.5) docile (1.1.5)
erubis (2.7.0) erubis (2.7.0)
eventmachine (1.0.3) eventmachine (1.0.3)
@ -107,6 +108,22 @@ GEM
json (~> 1.4) json (~> 1.4)
responders (1.1.1) responders (1.1.1)
railties (>= 3.2, < 4.2) railties (>= 3.2, < 4.2)
rspec-core (3.0.4)
rspec-support (~> 3.0.0)
rspec-expectations (3.0.4)
diff-lcs (>= 1.2.0, < 2.0)
rspec-support (~> 3.0.0)
rspec-mocks (3.0.4)
rspec-support (~> 3.0.0)
rspec-rails (3.0.2)
actionpack (>= 3.0)
activesupport (>= 3.0)
railties (>= 3.0)
rspec-core (~> 3.0.0)
rspec-expectations (~> 3.0.0)
rspec-mocks (~> 3.0.0)
rspec-support (~> 3.0.0)
rspec-support (3.0.4)
sass (3.2.19) sass (3.2.19)
sass-rails (4.0.4) sass-rails (4.0.4)
railties (>= 4.0.0, < 5.0) railties (>= 4.0.0, < 5.0)
@ -174,6 +191,7 @@ DEPENDENCIES
nprogress-rails nprogress-rails
pg pg
rails (= 4.1.7) rails (= 4.1.7)
rspec-rails (~> 3.0.0)
sass-rails (~> 4.0.3) sass-rails (~> 4.0.3)
sdoc (~> 0.4.1) sdoc (~> 0.4.1)
simplecov simplecov

43
spec/rails_helper.rb Normal file
View File

@ -0,0 +1,43 @@
# This file is copied to spec/ when you run 'rails generate rspec:install'
ENV["RAILS_ENV"] ||= 'test'
require 'spec_helper'
require File.expand_path("../../config/environment", __FILE__)
require 'rspec/rails'
# Requires supporting ruby files with custom matchers and macros, etc, in
# spec/support/ and its subdirectories. Files matching `spec/**/*_spec.rb` are
# run as spec files by default. This means that files in spec/support that end
# in _spec.rb will both be required and run as specs, causing the specs to be
# run twice. It is recommended that you do not name files matching this glob to
# end with _spec.rb. You can configure this pattern with the --pattern
# option on the command line or in ~/.rspec, .rspec or `.rspec-local`.
Dir[Rails.root.join("spec/support/**/*.rb")].each { |f| require f }
# Checks for pending migrations before tests are run.
# If you are not using ActiveRecord, you can remove this line.
ActiveRecord::Migration.maintain_test_schema!
RSpec.configure do |config|
# Remove this line if you're not using ActiveRecord or ActiveRecord fixtures
config.fixture_path = "#{::Rails.root}/spec/fixtures"
# If you're not using ActiveRecord, or you'd prefer not to run each of your
# examples within a transaction, remove the following line or assign false
# instead of true.
config.use_transactional_fixtures = true
# RSpec Rails can automatically mix in different behaviours to your tests
# based on their file location, for example enabling you to call `get` and
# `post` in specs under `spec/controllers`.
#
# You can disable this behaviour by removing the line below, and instead
# explicitly tag your specs with their type, e.g.:
#
# RSpec.describe UsersController, :type => :controller do
# # ...
# end
#
# The different available types are documented in the features, such as in
# https://relishapp.com/rspec/rspec-rails/docs
config.infer_spec_type_from_file_location!
end

81
spec/spec_helper.rb Normal file
View File

@ -0,0 +1,81 @@
require 'simplecov'
SimpleCov.start
# This file was generated by the `rails generate rspec:install` command. Conventionally, all
# specs live under a `spec` directory, which RSpec adds to the `$LOAD_PATH`.
# The generated `.rspec` file contains `--require spec_helper` which will cause this
# file to always be loaded, without a need to explicitly require it in any files.
#
# Given that it is always loaded, you are encouraged to keep this file as
# light-weight as possible. Requiring heavyweight dependencies from this file
# will add to the boot time of your test suite on EVERY test run, even for an
# individual file that may not need all of that loaded. Instead, make a
# separate helper file that requires this one and then use it only in the specs
# that actually need it.
#
# The `.rspec` file also contains a few flags that are not defaults but that
# users commonly want.
#
# See http://rubydoc.info/gems/rspec-core/RSpec/Core/Configuration
RSpec.configure do |config|
# The settings below are suggested to provide a good initial experience
# with RSpec, but feel free to customize to your heart's content.
=begin
# These two settings work together to allow you to limit a spec run
# to individual examples or groups you care about by tagging them with
# `:focus` metadata. When nothing is tagged with `:focus`, all examples
# get run.
config.filter_run :focus
config.run_all_when_everything_filtered = true
# Many RSpec users commonly either run the entire suite or an individual
# file, and it's useful to allow more verbose output when running an
# individual spec file.
if config.files_to_run.one?
# Use the documentation formatter for detailed output,
# unless a formatter has already been configured
# (e.g. via a command-line flag).
config.default_formatter = 'doc'
end
# Print the 10 slowest examples and example groups at the
# end of the spec run, to help surface which specs are running
# particularly slow.
config.profile_examples = 10
# Run specs in random order to surface order dependencies. If you find an
# order dependency and want to debug it, you can fix the order by providing
# the seed, which is printed after each run.
# --seed 1234
config.order = :random
# Seed global randomization in this process using the `--seed` CLI option.
# Setting this allows you to use `--seed` to deterministically reproduce
# test failures related to randomization by passing the same `--seed` value
# as the one that triggered the failure.
Kernel.srand config.seed
# rspec-expectations config goes here. You can use an alternate
# assertion/expectation library such as wrong or the stdlib/minitest
# assertions if you prefer.
config.expect_with :rspec do |expectations|
# Enable only the newer, non-monkey-patching expect syntax.
# For more details, see:
# - http://myronmars.to/n/dev-blog/2012/06/rspecs-new-expectation-syntax
expectations.syntax = :expect
end
# rspec-mocks config goes here. You can use an alternate test double
# library (such as bogus or mocha) by changing the `mock_with` option here.
config.mock_with :rspec do |mocks|
# Enable only the newer, non-monkey-patching expect syntax.
# For more details, see:
# - http://teaisaweso.me/blog/2013/05/27/rspecs-new-message-expectation-syntax/
mocks.syntax = :expect
# Prevents you from mocking or stubbing a method that does not exist on
# a real object. This is generally recommended.
mocks.verify_partial_doubles = true
end
=end
end