* Use table for statuses in report
* Display reported account and reporter in the same table
* Split accounts and general report info into two tables again
* Redesign report statuses table, notes, merge notes and action log
* Remove unused translations
* Fix code style issue
* Fix code style issue
* Fix code style issue
* Added a timeline for Direct statuses
* Lists all Direct statuses you've sent and received
* Displayed in Getting Started
* Streaming server support for direct TL
* Changes to match other timelines in 2.0
Commit 519119f657 missed a change for
stream entry page. Instead of duplicating the change, redirect to account
status page. It would also help crawlers (of search engines, for example)
to understand a stream entry URL and its corresponding status URL points
to the same page.
* Add bio fields
- Fix#3211
- Fix#232
- Fix#121
* Display bio fields in web UI
* Fix output of links and missing fields
* Federate bio fields over ActivityPub as PropertyValue
* Improve how the fields are stored, add to Edit profile form
* Add rel=me to links in fields
Fix#121
This also limits the statuses returned by API, but pagination is not
implemented in Web API yet. I still expect it brings user experience
better than making a user wait to fetch all ancestor statuses and flooding
the column with them.
* Further improvements to Reports UI
- Clean up notes display
- Clean up add new note form
- Simplify controller
- Allow reopening a report with a note
- Show created at date for reports
- Fix report details table formatting
* Show history of report using Admin::ActionLog beneath the report
* Fix incorrect log message when reopening a report
* Implement fetching of all ActionLog items that could be related to the report
* Ensure adding a report_note updates the report's updated_at
* Limit Report History to actions that happened between the report being created and the report being resolved
* Fix linting issues
* Improve report history builder
Thanks @gargron for the improvements
* Admin: Show unconfirmed email address on account page
* Admin: Allow staff to change user email addresses
* ActionLog: On change_email, log current email address and new unconfirmed email address
Conflicts:
app/serializers/initial_state_serializer.rb
The glitch flavour isn't yet pulling custom emoji data on its own (see
https://github.com/tootsuite/mastodon/pull/7047). Once that gets into
the glitch flavour, we can eliminate the custom_emojis load.
* Enable updating additional account information from user preferences via rest api
Resolves#6553
* Pacify rubocop
* Decoerce incoming settings in UserSettingsDecorator
* Create user preferences hash directly from incoming credentials instead of going through ActionController::Parameters
* Clean up user preferences update
* Use ActiveModel::Type::Boolean instead of manually checking stringified number equivalence
* Fix follow/unfollow buttons on public profile
- Present non-logged users with web+mastodon:// URLs for remote accounts
- Present logged-in users with appropriate links (authorize_follows and
remote_unfollows) for remote accounts
* Do not cache rendered cards if user is logged in
Previously these returns 302 redirects instead of 403s, which meant posting links to admin pages in slack caused them to unfurl, rather than stay as a link. Additionally, require_admin! doesn't appear to be actively used, on require_staff!
* Implement Assignment of Reports (#6967)
* Change translation of admin.report.comment.label to "Report Comment" for clarity
As we'll soon add the ability for reports to have comments on them, this clarification makes sense.
* Implement notes for Reports
This enables moderators to leave comments about a report whilst they work on it
* Fix display of report moderation notes
* Allow reports to be reopened / marked as unresolved
* Redirect to reports listing upon resolution of report
* Implement "resolve with note" functionality
* Add inverse relationship for report notes
* Remove additional database querying when loading report notes
* Fix tests for reports
* Fix localisations for report notes / reports
Previously the default locale was set by Localized concern for controllers,
but it was not enforced for mailers.
config is enforced throughout the application and an appropriate place to
set the default locale.
Use Rails smart boolean cast to account for values such as "f",
"0", "false", etc. Previously, if a param was present in the request,
it would count as true.
* Fix prev/next links on public profile page
* Don't make pagination urls if no available statuses
* Fix empty check method
* Put left chevron before prev page link
* Add scope for pagination "starting at" a given id
* Status pagination try 2:
s/prev/older and s/next/newer
"older" on left, "newer" on right
Use new scope for "newer" link
Extract magic 20 page size to constant
Remove max_id from feed pagination as it's not respected
* Reinstate max_id for accounts atom stream
* normalize
* Redesign landing page (again)
* Move login form in small version to the right column
* Display closed registrations message
* Add site setting for the hero image
* Fix test
* Increase spacing, maximum width, change call to action section
* Add focus param to media API, center thumbnails on focus point
* Add UI for setting a focal point
* Improve focal point icon on upload item
* Use focal point in upload preview
* Add focalPoint property to ActivityPub
* Don't show focal point button for non-image attachments
* Fix#201: Account archive download
* Export actor and private key in the archive
* Optimize BackupService
- Add conversation to cached associations of status, because
somehow it was forgotten and is source of N+1 queries
- Explicitly call GC between batches of records being fetched
(Model class allocations are the worst offender)
- Stream media files into the tar in 1MB chunks
(Do not allocate media file (up to 8MB) as string into memory)
- Use #bytesize instead of #size to calculate file size for JSON
(Fix FileOverflow error)
- Segment media into subfolders by status ID because apparently
GIF-to-MP4 media are all named "media.mp4" for some reason
* Keep uniquely generated filename in Paperclip::GifTranscoder
* Ensure dumped files do not overwrite each other by maintaing directory partitions
* Give tar archives a good name
* Add scheduler to remove week-old backups
* Fix code style issue
* Add option to show only local toots in timeline preview
Right know, toots from all the known fediverse are shown in the main
page of an instance. That however doesn't reflect the instance itself.
With this option the admin may choose to display only local toots so
that users checking the instance get a better idea of internal
conversations.
* Fix issues pointed by codeclimate and eslint
* Add default message for community timeline
* Update pl.yml
UserTrackingConcern is circumvented by SessionsController#create
because it calls warden, which calls the User#update_tracked_fields!
method directly. Move returning user logic to that method.
* Fix regeneration marker not being removed after completion
* Return HTTP 206 from /api/v1/timelines/home if regeneration in progress
Prioritize RegenerationWorker by putting it into default queue
* Display loading indicator and poll home timeline while it regenerates
* Add graphic to regeneration message
* Make "not found" indicator consistent with home regeneration
CSRF token checking was enabled for API controllers in #6223,
producing "Can't verify CSRF token authenticity" log spam. This
disables logging of failed CSRF checks.
This also changes the protection strategy for
PushSubscriptionsController to use exceptions, making it consistent
with other controllers that use sessions.
If a flavour has only one skin, the skin selector will be omitted. This
omits the user[setting_skin] field, and because that's the only
user[...] field on the page, the entire user object will not be present
in the request handler's params object.
This commit accounts for that scenario by avoiding params.require(:user)
and instead picking out what we need from the params hash.
* Allow HTTP caching of json view of public statuses
HTML views are not cached as they can contain private statuses as well
* Disable session cookies for ActivityPub json rendering of public toots
* Add confirmation step for email changes
This adds a confirmation step for email changes of existing users.
Like the initial account confirmation, a confirmation link is sent
to the new address.
Additionally, a notification is sent to the existing address when
the change is initiated. This message includes instruction to reset
the password immediately or to contact the instance admin if the
change was not initiated by the account owner.
Fixes#3871
* Add review fixes
* Add GET /api/v1/instance/peers API to reveal known domains
* Add GET /api/v1/instance/activity API
* Make new APIs disableable, exclude private statuses from activity stats
* Fix code style issue
* Fix week timestamps
* Make host_meta/webfinger replies cacheable (fixes#6100)
Drop common code for handling users and sessions as webfinger queries
are very basic, public APIs.
Also explicitly mark results as cacheable with “expires_in”.
* Add “Vary: Accept” header for caching since content-negociation is used
Specifically, this commit:
- changes S::TFA::{Confirmations,RecoveryCodes}Controller to derive from
S::BaseController, because this gives us the necessary actions and
packs
- prepends set_pack to Auth::SessionsController's action chain so that
it takes effect in time for render :two_factor
The specs for Settings::DeletesController include an example that
sets Settings.open_deletion to false and expects the "if deletion is not
available, redirect to root" logic to run. However, this spec does not
set up a user, which means that the spec (intentionally or otherwise)
expects this redirection to work with unauthenticated access.
We should preserve that behavior. To do so, we prepend the deletion
check to the action chain set up by Settings::BaseController, so that
said check occurs before the authenticate_user! check.
* Add list of lists component to web UI
* Add list adding
* Add list removing
* List editor modal
* Add API account search limited by following=true relation
* Rework list editor modal
* Remove mandatory pagination of GET /api/v1/lists/:id/accounts
* Adjust search input placeholder
* Fix rspec (#5890)
* i18n: (zh-CN) Add missing translations for #5811 (#5891)
* i18n: (zh-CN) yarn manage:translations -- zh-CN
* i18n: (zh-CN) Add missing translations for #5811
* Fix some issues
- Display loading/missing state for list timelines
- Order lists alphabetically in overview
- Fix async list editor reset
- Redirect to /lists after deleting unpinned list
- Redirect to / after pinning a list
* Remove dead list columns when a list is deleted or fetch returns 404
* Allow hiding of reblogs from followed users
This adds a new entry to the account menu to allow users to hide
future reblogs from a user (and then if they've done that, to show
future reblogs instead).
This does not remove or add historical reblogs from/to the user's
timeline; it only affects new statuses.
The API for this operates by sending a "reblogs" key to the follow
endpoint. If this is sent when starting a new follow, it will be
respected from the beginning of the follow relationship (even if
the follow request must be approved by the followee). If this is
sent when a follow relationship already exists, it will simply
update the existing follow relationship. As with the notification
muting, this will now return an object ({reblogs: [true|false]}) or
false for each follow relationship when requesting relationship
information for an account. This should cause few issues due to an
object being truthy in many languages, but some modifications may
need to be made in pickier languages.
Database changes: adds a show_reblogs column (default true,
non-nullable) to the follows and follow_requests tables. Because
these are non-nullable, we use the existing MigrationHelpers to
perform this change without locking those tables, although the
tables are likely to be small anyway.
Tests included.
See also <https://github.com/glitch-soc/mastodon/pull/212>.
* Rubocop fixes
* Code review changes
* Test fixes
This patchset closes#648 and resolves#3271.
* Rubocop fix
* Revert reblogs defaulting in argument, fix tests
It turns out we needed this for the same reason we needed it in muting:
if nil gets passed in somehow (most usually by an API client not passing
any value), we need to detect and handle it.
We could specify a default in the parameter and then also catch nil, but
there's no great reason to duplicate the default value.
* Add consumable invites
* Add UI for generating invite codes
* Add tests
* Display max uses and expiration in invites table, delete invite
* Remove unused column and redundant validator
- Default follows not used, probably bad idea
- InviteCodeValidator is redundant because RegistrationsController
checks invite code validity
* Add admin setting to disable invites
* Add admin UI for invites, configurable role for invite creation
- Admin UI that lists everyone's invites, always available
- Admin setting min_invite_role to control who can invite people
- Non-admin invite UI only visible if users are allowed to
* Do not remove invites from database, expire them instantly
* Add structure for lists
* Add list timeline streaming API
* Add list APIs, bind list-account relation to follow relation
* Add API for adding/removing accounts from lists
* Add pagination to lists API
* Add pagination to list accounts API
* Adjust scopes for new APIs
- Creating and modifying lists merely requires "write" scope
- Fetching information about lists merely requires "read" scope
* Add test for wrong user context on list timeline
* Clean up tests
* Add a hide_notifications column to mutes
* Add muting_notifications? and a notifications argument to mute!
* block notifications in notify_service from hard muted accounts
* Add specs for how mute! interacts with muting_notifications?
* specs testing that hide_notifications in mutes actually hides notifications
* Add support for muting notifications in MuteService
* API support for muting notifications (and specs)
* Less gross passing of notifications flag
* Break out a separate mute modal with a hide-notifications checkbox.
* Convert profile header mute to use mute modal
* Satisfy eslint.
* specs for MuteService notifications params
* add trailing newlines to files for Pork :)
* Put the label for the hide notifications checkbox in a label element.
* Add a /api/v1/mutes/details route that just returns the array of mutes.
* Define a serializer for /api/v1/mutes/details
* Add more specs for the /api/v1/mutes/details endpoint
* Expose whether a mute hides notifications in the api/v1/relationships endpoint
* Show whether muted users' notifications are muted in account lists
* Allow modifying the hide_notifications of a mute with the /api/v1/accounts/:id/mute endpoint
* make the hide/unhide notifications buttons work
* satisfy eslint
* In probably dead code, replace a dispatch of muteAccount that was skipping the modal with launching the mute modal.
* fix a missing import
* add an explanatory comment to AccountInteractions
* Refactor handling of default params for muting to make code cleaner
* minor code style fixes oops
* Fixed a typo that was breaking the account mute API endpoint
* Apply white-space: nowrap to account relationships icons
* Fix code style issues
* Remove superfluous blank line
* Rename /api/v1/mutes/details -> /api/v2/mutes
* Don't serialize "account" in MuteSerializer
Doing so is somewhat unnecessary since it's always the current user's account.
* Fix wrong variable name in api/v2/mutes
* Use Toggle in place of checkbox in the mute modal.
* Make the Toggle in the mute modal look better
* Code style changes in specs and removed an extra space
* Code review suggestions from akihikodaki
Also fixed a syntax error in tests for AccountInteractions.
* Make AddHideNotificationsToMute Concurrent
It's not clear how much this will benefit instances in practice, as the
number of mutes tends to be pretty small, but this should prevent any
blocking migrations nonetheless.
* Fix up migration things
* Remove /api/v2/mutes
* Add option to block direct messages from people you don't follow
Fix#5326
* If the DM responds to a toot by recipient, allow it through
* i18n: Update Polish translation (for #5669) (#5673)
* Add moderator role and add pundit policies for admin actions
* Add rake task for turning user into mod and revoking it again
* Fix handling of unauthorized exception
* Deliver new report e-mails to staff, not just admins
* Add promote/demote to admin UI, hide some actions conditionally
* Fix unused i18n
* Show the local couterpart of emoji when it exists in admin/custom_emojis
* Fix indentation
* Fix error
* Add class table-action-link to Overwrite link
* Make it enable to overwrite emojis
* Make Code Climate happy
There are two motivations for this:
1. It looks like we're going to add other features that require
server-side storage (e.g. user notes).
2. Namespacing glitchsoc modifications is a good idea anyway: even if we
do not end up doing (1), if upstream introduces a keyword-mute feature
that also uses a "KeywordMute" model, we can avoid some merge
conflicts this way and work on the more interesting task of
choosing which implementation to use.
This should eventually be accessible via the API and the web frontend,
but I find it easier to set up an editing interface using Rails
templates and the like. We can always take it out if it turns out we
don't need it.
Akihiko Odaki